2081320 - Targeted CR List for ASE 15.5 ESD#5.2 - SAP ASE | SAP Knowledge Base Article

SAP Knowledge Base Articles - preview

2081320 - Targeted CR List for ASE 15.5 ESD#5.2 - SAP ASE


The purpose of this KBA is to help SAP customers obtain a general idea of potential fixed situations in future Adaptive Server Enterprise (ASE) EBF/SP or PL releases. Please be sure to read the Disclaimer below.

If the EBF/SP has been released, check the CR list and coverletter at the service.sap.com.

Disclaimer: This document lists the targeted (not committed) release dates and the targeted fixed CR list for each release. Please be aware that the purpose of this posting is solely to provide you, our customers with estimated release dates and targeted CR lists. SAP does not commit to releasing on the specified dates or to including the CR fixes in the said release. While every effort will be made to meet the said targets, changes can occur at any time. It is also possible (although unlikely) that SAP may decide not to release an EBF/SP that was previously scheduled for release.


CR number



Duplicate key values could be generated for identity column during checkpoint of the database. For tables with unique indexes on identity column, it would give error 2601 'Attempt to insert duplicate key row in object < obj_name > with unique index < index_name > '. more co A more complete version of this fix has been developeed under CR 614823, i.e. 614823 supersedes 588137.


ASE installations with large number of databases, with high number of engines and inter database transactions would result in high contention of dbt_spin.


In rare circumstances, a 12323 error may be raised when running REORG REBUILD on nonclustered index of a DATA_ONLY LOCKED table.


The execution of SP_RENAME and SP_CONFIGURE will raise error 17260 "Can't run < procname > from within a transaction." incorrectly when invoked under chained transaction mode despite that there is no open transaction.


ARIES CE with > 1 instance setup hits SIG11 inside function lock__mmaster_processque


Updating identity columns gives error 586: Illegal identity value specified for identity


The message "current process infected with 11" in the module 'bufdlink' together with a stack trace which includes the modules 'pg_allocate' and 'bufpindirty' may be reported in the error log when a table was in the process of being created and ASE has previously hit a 1204 error "ASE has run out of LOCKS. Re-run your command when there are fewer active users, etc.".


A 290024 error, "Invalid column length: < number > Value must be between < number > and < number > at offset < number > ..." may be reported during a UPDATE plan execution when a complex VIEW or derived table (such as UNION or GROUPBY) is used in the FROM clause of the UPDATE statement.


After entered the ASE login/password in the login dialog to configure the existing ASE, syconfig crashed.


When a table is being replicated to a table that includes an additional IDENTITY, an error "AOP not found in getAopt" is raised.


The ASE PCI layer responsible for the execution handshake of ADT and UDF Java operations with the integrated COTS JavaVM is enhanced to achieve better performance.


High cpu usage seen with rprocmgr_spin contention


In rare circumstances, terminating an idle CIS connection may result in some form of memory corruption in the next connection attempt.


When using some devices (i.e. EQLOGIC) on Linux with multipathing, ASE cannot correctly locate the alternate paths to the raw devices for I/O fencing which may prevent ASE from starting up.


The threshold status passed to the threshold stored procedure sp_thresholdaction may contain some unexpected data for thresholds other than the last chance threshold.


CIS creates the first text page in an INSERT-SELECT query even though the source data is null. To activate the fix, trace flag 11241 needs to be turned on.


Abstract plan error message could be reported when using "set forceplan on" for outer join query with subquery.


Abstract plan error could happen failing to apply a right nested outerjoin abstract plan. It is more likely to happen when there is a subquery at the inner side too. Same issue could also cause optimizer to ignore certain legit merge/hash outerjoin bushy plan too under allrows_dss optimization goal.


We need a code change for histserver to allow the increase of the SRV_S_DEFQUEUESIZE for customers who use histserver against multiple ASEs. The current default is not sufficient.


In rare circumstances on a heavily-loaded multi-engine system, a 8201 error "Keep count of descriptor (objid= < id > , dbid= < id > ) was expected to be 1. Instead 0 was found." may be reported in the error log together with a stack trace which includes the modules 'des__unkeep' and 'close_range' when an INSERT, DELETE or UPDATE is executed on a table that has many referential integrity constraints defined and after the execution of one of its triggers. Alternatively the message "infected with 11" in the modules 'seq_schema_check_virtab' or 'LeScanOp::_LeOpOpen' may be reported.


A 11051 error, "ALTER TABLE ' < table_name > ' failed. Table is currently being used by one or more other tasks." may be reported when a REORG REBUILD command is run while another process concurrently runs a SELECT query on the same table at isolation level read uncommitted. Following this error and while the SELECT query continues to execute, any process that attempts to reference this table will fail mistakenly with an error such as 17461 "Object does not exist in this database.".


When the coordinator node is shutdown, the new coordinator may be fenced out when new instance joins the cluster. The new coordinator will display write errors and then shutdown e.g. "sddone: write error on virtual disk 0 block 4598". This issue has been resolved via CRs 680776 and CR 686131.


High rprocmgr spinlock contention may be observed under heavy workload of dynamic SQL and stored procedures.


When tempdb_space resource limit is reached, any subsequent work table creation operation fails and does not release the buffers and the allocated tempdb pages during the execution.


In rare circumstances on a heavily-loaded multi-engine system, the message "timeslice < value > , current process infected" together with a stack trace which includes the modules 'jldr_ReleaseLocalLoader' and 'pci_free' may be reported in the error log when applications use JAVA extensively.


In rare circumstances, Adaptive Server may hang as a result of an undetected deadlock between a process that is executing a DUMP TRANSACTION and another process that is running a query that uses the last-chance threshold builtin LCT_ADMIN.


Reservation conflict messages may appear in the system log on systems with multipathing when I/O fencing is enabled.


When ASE is configured with multi-bytes charset with 'statement cache' and 'literal autoparam' enabled, repeatedly executing a SQL batch with comments containing multiple byte characters can cause error 102.


In a 2 node or greater ASE Cluster Edition setup, a database with a log segment threshold defined may result in incorrect values for unreserved data pages and no thresholds enabled. The database will report log is full and transactions will either suspend or abort, depending on the configuration paremeter "abort tran on log full" value. This can only occur when the database has multiple thresholds and the second threshold is crossed before the first one is completely handled.


High rprocmgr or rpmctrl spinlock contention may be observed under heavy workload of dynamic SQL or stored procedures.


When an INSERT query attempts to insert an explicit value for a TIMESTAMP column a warning will be reported, but query execution continues. If the explicit value for the TIMESTAMP column is the result of evaluating an expression, and the query plan for the INSERT is re-executed (i.e. because the statement cache and literal auto parameterization are enabled or because the INSERT query is part of a stored procedure), memory corruption may occur, leading to various stack traces.


In some rare scenarios, procedure cache memory tracking data structures may get accessed after they are freed to global memory queue. This may lead to procedure cache memory corruption.


The message "current process infected with 11" in the module 'bufpindirty' together with a stack trace which includes the modules 'xact__rollbackxact' and 's_execute' may be reported in the error log if a SELECT INTO statement involving a big number of tables (more than 96) is aborted with a 226 error, "SELECT INTO command not allowed within multi-statement transaction". If after that a ROLLBACK TRAN is executed by the same session a 6203 error "Unable to do cleanup for the killed process; received Msg ..." may also be reported in the error log.


Optcriteria 619756 (enabled in optlevels ase1503esd4 or ase_current) could generate a SEGV and/or assertion failure. The stacktrace associated with the SEGV will typically include references to optimizer routines. In a diagserver, the following assertion (eqc- > eqcIsUnrefed() || OptDuringGtuLocalGroupingPrimingHack()) may fail.


In rare circumstances, a signal 11 may be reported in the errorlog with a stack trace involving the sort module if a reformatting query plan is used.


The message, "timeslice -501, current process infected at 0x < address > ", in the module 'cm_writelogdes_upto_sequence' together with a stack trace which includes the modules 'cmcc__wri_bcmt_proc' and 'bufwritedes_log' may be reported in the error log when ASE flushes a syslogs page on disk while downgrading the physical lock held on this syslogs page in a 2 node Cluster Edition setup.


When a primary key contains IDENTITY columns, INSERT INTO and SELECT statements may create bad LTL causing the RepServer to report the error message, "Incorrect syntax near the keyword FROM". This is fixed via CR 674627.


Dataserver might hit SIGSEGV in is_vpar() during startup on HP PA-RISC vPar.


Predicates that contain more than 128 or-terms in a disjunct may not be optimized using a general-or strategy. In cases where such a general-or strategy provides the only efficient search strategy, query performance could be poor.


Enabling I/O fencing may result in "reservation conflict" messages in the system log.


Invoking the soundex() or difference() built-ins on unichar/univarchar strings larger than 127 characters (254 bytes) may cause the process to be terminated.


Idle connections may fail to migrate during instance shutdown.


Adaptive Server may not kill a task that is marked for termination, which is reporting shortage of buffers in buffer pool like "cache is configured too small for current demands".


The ASE COTS JavaVM version is updated to version JRE 6 update 33 for each supported platform in the sybpcidb database.


Error 2812 or 11214 is raised when accessing an MDA table specifically mapped as a proxy table.


Parallel queries with the following query plan scenario MIGHT fail with a "Command has been aborted" message and no other warnings/errors reported in the error log: o There is a merge-join op where one of its child trees contains a replication exchange operator. o There is no "draining" operator (e.g. sort operator) between the merge-join and the exchange operator. o The merge-join's other child drains its input stream before the child with the replication exchange does.


Adaptive Server may encounter a storage access violation error when query execution is interrupted or some special query is executed on 64bit diagsrvr.exe or 32bit sqlsrvr.exe on windows platform.


A 14108 error, "Could not find partition descriptor for objid %d, indid %d, ptnid %d in dbid %d" may be reported when running DBCC DBREBOOT if traceflag 12315 is off.


Very slow optimisation of queries with large IN clauses Excessive stack usage with aggregate queries with large IN clauses


If Java in the database is being used, then if the "same" shared configuration file is used by more than one instance or Server, then there is a race condition during JVM initialization where it is possible that the message ?current process infected with signal 11? in the function ?jvminit? may be reported in the error log, followed by the message ?Failed to initialize Java services". This may result in ASE shutting itself down.


Literal auto parameterization of large IN lists may cause performance issues. Trace flag 7786 was introduced to turn off literal auto parameterization of queries with large IN lists ( > 128 constants) as well as avoiding caching of the respective statement. Trace flag 7786 only has an effect if literal auto parameterization is turned on i.e. if literal auto parameterization is turned off, then the statement will still be cached.





  • AIX 64bit
  • HP-UX on IA64 64bit
  • Linux on Power 64bit
  • Linux on x86 64 64bit
  • Solaris on Sparc 64bit
  • Solaris on x86 64 64bit
  • Windows on x64 64bit


SAP Adaptive Server Enterprise 15.7 ; Sybase Adaptive Server Enterprise 15.5


CR, ASE 15.5 ESD#5.2, ASE 15.5, ESD#2, ESD 5.2, Adaptive, Server, Enterprise, Fix, Patch, Error, Bug , KBA , BC-SYB-ASE , Sybase ASE Database Platform (non Business Suite) , BC-DB-SYB , SAP Business Suite on Sybase ASE Database Platform , BC-SYB-ASE-CE , ASE Cluster Edition (Standalone) , BW-SYS-DB-SYB , BW on Sybase ASE Database Platform , Problem

About this page

This is a preview of a SAP Knowledge Base Article. Click more to access the full version on SAP ONE Support launchpad (Login required).

Search for additional results

Visit SAP Support Portal's SAP Notes and KBA Search.